Categories
Engineering Life Work

How to Work a Job Fair as an Engineer

Clarification: When I write “work a job fair”, I mean how to get the most out of it as a student or job seeker. This could be confused with the fact that I sometimes recruit at job fairs, but I thought this should be brought up at the beginning after I re-read the article.

In talking to a fellow engineer about to attend a career fair, I realized I had some advice for him, having gone so many times in the past. I’ve even been back a few times to recruit for my current company and being on the other side of the handshake is an interesting insight into the do’s and don’ts.

  1. As soon as you realize they want you to apply online, ditch.
    • First off, this was a pet peeve of mine as an attendee and is to this day. As soon as HR departments at large companies realized they could just use computers to filter the resumes of prospective employees instead of reading them (yeah, I’m looking at you Big Blue), they did it as fast as they could. The result was that you now walk around job fairs talking to people and handing out resumes, only to assume those people will be throwing it away ten minutes later (“Why did I print that on paper that costs 50 cents a sheet?!?”). In the event you’re talking to someone from a company and you even overhear a different recruiter asking someone to apply online (assuming you hear it before you’re told directly to do so), kindly end the conversation with the person you’re talking to and write in your notes to apply later. Job fairs are to make first impressions; if the employers’ representatives are not taking notes on the people they are talking to, they really are only wasting your time.
  2. Be excited
    • Enthusiasm is contagious. It can make any conversation more exciting and in the case of the recruiters, less routine. They have many of the same conversations over and over throughout the day, often with people that don’t show particular enthusiasm for what they are talking about. More importantly, enthusiasm about your chosen field is a precursor to another trait that I feel is particularly important in any field: passion. Without it, you probably won’t be able to hold your interest long enough to become an expert in your field. And I mean a real expert, not like those silly people online that start blogs and call themselves experts. Haha.
  3. Be excited, but show a little modesty
    • Before you go off the rails and start spouting all of your best characteristics to a potential employer, remember a few things:
      1. Designing something in school is much different than designing something in the real world.
      2. No one wants to hear every single detail of your design project upon first meeting you.
      3. As an engineer, getting a design job just out of school is difficult and unlikely. The majority of engineers use their degree to launch into other types of jobs. I’m not saying you shouldn’t shoot for a design job if you want one, I’m just saying the expectation shouldn’t be that you will be handed one (and you should keep your mind open to all opportunities).
      4. If you present your past work correctly, the work will speak for itself. In fact, succinctly describing your achievements in an understandable way will help to show your enthusiasm much better than you trying to squeeze 500 words into a 1 minute time period. Show them that you are really proficient in the area you’re targeting and you’ll get recruiters clamoring to know how much you really know (and eventually what it’ll take to get you on their team).
  4. Forget the give-aways
    • The pens and t-shirts and yo-yo’s and other stuff they give away at these events are fun to get and sometimes quirky, but essentially worthless. If you want to get free stuff with a logo on it, go get the job from the company and worry about the branded crap later. Focus your time and resources on meeting people, not collecting widgets.
  5. Figure out what skills they’re looking for
    • No amount of preparatory work researching the companies you’re targeting will let you know what skills a company is looking for. Hell, it’s in the company’s interest to be vague when they list what kind of employee they’re looking for so the maximum number of people will stop by their booth. This is one of your most important tasks at career fairs; in fact, it’s one of the few reasons to stick around and continue talking to a representative from a company once you have found out they only accept applications online. Talk to the engineers that work in groups you would want to work in (wait to talk to them if there is a line) and find out what they look for in potential candidates. In fact, ask them that, “What do you look for in potential candidates who would be hired for YOUR position?”. It might sound a little weird, like you want to replace them with yourself, but it’s the most direct way to know what skills and techniques you need to have to work there. If you have those skills, awesome. If you don’t, work on getting those skills, however you can.
  6. Know what you like and don’t like and tell them about it
    • This hearkens back to being enthused about the field you’re studying. In the event you’re not very capable in transmitting your enthusiasm to the person you’re talking to, stating what you do and don’t like can help to showcase what you’re really trying to do with your career. But it’s also important because you can narrow down the companies that can actually offer you a job. If you’re really interested in embedded systems but you’re talking to  a company that only works on designing silicon, stating what you’re interested in can be a real time saver. If you’re not particularly fond of working on spreadsheets or databases and you say so, you can quickly be informed by the company you’re talking to that those things would be the main job function of any potential employees. In stating what you really like and dislike, you basically turn a career fair into a speed-dating service, quickly going through all of the options at a particular event and honing in on those that have real potential.
  7. Brush your teeth. Wear a clean shirt. Don’t be a robot.
    • I only wish this was more obvious to people than it is. I’ve already been pointing out that career fairs are only as useful as the impressions you make on potential employers; sometimes it’s also about the resume you hand them.  But if the whole ordeal is about impressions, some people don’t get it. Look decent, smell decent, smile decent. These are all things that are easy but immediately put you out of the running if you get them wrong. Remember the lollipop first question for $100 on “Who Wants to be a Millionaire”? Remember some of the dodos who got it wrong and had to immediately leave the stage? Don’t be one of them.

Do I know everything about job fairs? No, I know very little. I personally never really liked them as a potential employee. I’d rather stand out to an employer  by connecting on a personal level with a recruiter and then showcasing what I know. There just isn’t time for that at career fairs. But if you or the employers you’re interested in working for consider career fairs a necessary evil, I think the tips listed above can have a positive effect on some of your interactions.

What kinds of things do you try to do at job/career fairs? Can those things be done by engineers at career fairs or are they specific to another profession? Please let us know in the comments.

Categories
Economics Learning Politics Work

Unorthodox City Development

Although I’ve been busy working on Electricio.us lately (thereby neglecting this site), I have been able to continue listening to my local NPR station (which, like any good nerd, I love). A program the other day spoke to a local community trying to build up the economy through the arts.

I was intrigued. I had never thought of that before. Why would anyone ever try to develop an arts community first? Where are the jobs? Well folks, we have a bona fide Chicken and Egg paradox here. It really goes both ways. What happens if a community only has day jobs and no culture? What happens if you develop a thriving arts community before there are “Economic Drivers” and jobs for people moving there?  Does the absence of one element slow the growth of the other?

I would tend to think the jobs come first. And of course when I think jobs I think of technical jobs, not those silly financial jobs that got us into this mess of a recession. I mostly think of technical jobs first because I’ve never really experienced anything else and I’ve heard technical jobs can have a multiplicative effect (helping to create some of the other jobs I’m not as fond of). But what happens in locations where there are only jobs and no culture to go along with it? Who really wants to live there?

An example is contained within Eric Weiner’s book, The Geography of Bliss (which I first read about at Get Rich Slowly). He is traveling the world, looking to explain why some locales are happier than others. In the midst of his travels, he goes to Qatar (one of the richest regions in the world) where he encounters a city booming with jobs (mostly for migrant workers) to fill the “need” of those rich from petrodollars. However, he notes the absence of culture and even references how the richest from that country travel the world buying up impressive art collections in a hope to obtain culture. The result is a city full of people being shuttled to and from chain restaurants and malls, without any interesting things in between. Even the history museum is filled with artifacts toil and struggle in the desert…and not much else. Because the jobs in the region are scarce, no one really wants to be there, but no one working there can really leave.

The other extreme is when a city has a strong art and culture community but is lacking in jobs. An example is New York City in the current recession. Even though the current unemployment numbers are hovering around 10.3%, people continue to move to the city. Why? Because you can’t find many other places in the world with a similar art and culture scene. Where else can you find so many museums in a 10 mile radius? But when it comes to being practical? No, not so much. The fact that the unemployment is only 10.3% is likely because of the high costs associated with living in or even near the city.

So back to the original example. Would starting an arts community allow for eventual development of a thriving economy? It depends. Are there other nearby communities that can feed into this new community? Are those other communities lacking in culture or interesting events of their own, thereby necessitating people in that community to travel? Are there people in the existing community that will be benefactors to the new community? And most importantly, are there people willing to move to and develop a new arts and culture based community?

If there is a willing population, both moving to and surrounding a new (or revitalized) community, then I believe it would be possible to use arts and culture to build up a local economy. I think that it is a non-standard way to draw young and artistic people into a new place and to centralize events and gatherings; this, in turn, could help to draw people that aren’t contributing to the art and cultural scene directly but want to experience and patronize it. I know that Cleveland, with excessive sprawl and thinly populated suburbs, could really benefit from a community such as this (really it will be supplementing many other creative and culturally rich regions). Although the travel required between regions is undesirable, I think creating an arts community can really help to bring people together, which is really what drives economic growth over the long term. Do I think there will ever be large corporations moving in and bringing thousands of jobs to this revitalized community? No, I don’t; but that’s not really the point anyway.

I’m interested to know if anyone has heard of other communities built first around cultural and artistic endeavors that later blossomed into vibrant communities. If you have ever heard of one or have an opinion about what they’re trying in Cleveland, please leave a note in the comments.

Categories
Blogging Engineering Learning Life

A Day of Labor: My New Website and Project

It wasn’t just today. It wasn’t really the day last week when I registered my new domain name. It was pretty soon after starting this blog that I realized how much more powerful having a website with multiple contributors to keep a consistent flow of information. “Welcome to the party!”, right? I realize there are a lot of other sites that take advantage of this idea. I didn’t think of it earlier though so here’s my chance. And here’s your chance too.

I am now on the hunt for the most articulate and technically proficient EEs and quasi-EEs out there. I plan to use this new website as a warehouse for important electrical engineering knowledge I wish I always had. I still wish I have it, because it can be very hard to keep track of (ever searched through that old pile of industry magazines? Yeah, me neither). Sure, there are sites out there like EDN and EETimes that have some spectacular writers and some interesting insight into the industry; however, I have always felt their hands were tied by a business model built upon advertising revenues that also might happen to maybe, possibly, sometimes on the harvest moon, when the winds are blowing right…influence the articles (at least in terms of what is written about). Maybe not, but it feels that way. Moreover, it feels like there is less technical content on those sites than there used to be. It’s understandable, the recession is kicking everyone’s butt, and it’s not taking it easy on the publishing industry. But the point remains, I want a place where I can consistently go to for up to date information about skills and techniques and I want to be able to understand it. I want it to be written by the top engineers and scientists out there and I want it to be in a format that is instantly applicable and useful.

As for ChrisGammell.com, I don’t really plan on changing too much. I will still write articles somewhere between technical and non-technical and try to post as often as I can. However, I think for my long term writing, I need to be part of a site that is on neutral ground and with a community built around it. I, like many in my generation, was raised working in teams and I think this will be the best format to help disseminate knowledge to others in the future.

If you are interested in contributing to a site such as this, please feel free to contact me and let me know what you would like to contribute. If you have a suggestion for the new site please leave a note in the comments below. I always appreciate feedback (even negative feedback! heh).

So let’s see, I told you my plans, I explained why I think they are important to me and others, I explained what would (or would not) happen to this site and I suggested you contact me if you’re interested in joining. Am I forgetting something?

Ah yes. The new site and community I started is called Electricio.us. I hope you like it.

Screenshot-Electricio-us

Categories
Analog Electronics Renewable Energy Sustainability

The Sustainability/Renewable Energy Jumble

I get it. Some of you out there don’t give a hoot about sustainability. I figured that out when people started unsubscribing from email subscriptions to my post feed. Sure, it could have been people switching over to an RSS feed reader, but it coincided with my posts about the Sustainable Cleveland 2019 summit (I may have gotten carried away with the writing).

For a while I was writing only about analog stuff, electrical engineering stuff and workplace stuff. To be honest, when the recession hit it was difficult to think of much else; when our security feels threatened (job, personal or otherwise), we revert to more basic creatures. It’s funny that we care most about the environment (the population as a whole) only when there is nothing  wrong with the economy. That is, if you don’t include gas prices; it seemed like we definitely felt threatened at $4 a gallon for unleaded. Anyway, I focused a little more on the electrical side of things whereas this site started out more on the renewable energy side of things.

And then I had the opportunity to attend the summit and it was really great. I met some awesome people and really got to see a side of Cleveland I never thought I’d see. It renewed my interest in renewable energy applications/technology and got me excited about the prospects of working on it in Cleveland. But I wasn’t completely satisfied with the summit. I found my experiences a few weeks later at a wind energy talk with Larry Viterna of the Great Lakes Energy Institute to be much more satisfying. Sitting and discussing the technical issues involved in a renewable energy system is much more appealing to me than going out in the community and rallying support for the idea (though I definitely understand the importance of doing so). I always feel that I am getting more done when I discuss the technical aspects of a project than the logistical aspects; it is not realistic to ever ignore one or the other, I just feel that I can contribute more to the technical side, due to my interest.

As a result of all of those experiences, I think I figured something out: I am much more interested in renewable energy and the technology behind it than the sustainability movement and working on how best to implement the methodologies. I completely agree with the concept of sustainability and try to lessen my personal impact by improving the energy efficiency of my house and changing my personal habits. However, I view sustainability as a management field whereas I view renewable energy as a technological field (a simplification I’m sure); right now, I am much more interested in technical matters than management matters.

As for the jumble of sustainability and renewable energy talk on this site and others, it’s important to realize they are different topics, yet intertwined. One cannot exist without the other: sustainable businesses require low cost, non-polluting power and renewable energy has greater demand when sustainable companies want a renewable source of power. As such, I plan to write only about the renewable energy topics, unless there are implications with sustainable business/life practices.

So while I do not plan on going out and knocking on the doors of businesses and homes to start pushing them to adopt sustainability practices, I do want to relay why I think they are important. Moreover, I want to point out the concepts I would embrace when I start my company (someday in the future). And even if I was completely detached from the business world, I feel that the benefits of adopting sustainability are relevant in my personal life and can have some serious implications for the future.

  1. It saves you money — The zero-waste concept is a powerful one; it also can save a ridiculous amount of money for you or your business if you properly plan an execute a plan of action. If you don’t have to pay for waste removal, don’t have to pay extra for unused raw materials and possibly even get paid for recycling some of your spent resources, you can save or net a significant amount of cash.
  2. It makes you less of a burden on the planet — This point doesn’t have any immediate benefits, but makes sense. Look all around you at every living thing: they all give back to their environment in some way. Humans aren’t great at matching this performance, but there is a movement to begin consuming less and being less of a burden on the planet.
  3. It’s not hard — Yes, you will have to watch your production processes and make sure you aren’t unnecessarily creating waste. Yes, you might have to pay a little bit more for clean energy from the electric company or have renewable energy capability installed at your facility/home. Yes, you will have to recycle instead of sending it to a landfill. But once the mindset is in place it becomes second nature.
  4. It saves you money — I can’t stress idea enough. Sustainable business practices make money. That’s why you see corporate giants like Walmart joining the party and delivering added value to their shareholders.

I plan to continue to focus on renewable energy research and applications, as it is where my greatest interests lie in the whole scope of the sustainability movement. I know there are many many more components that I will not be able to contribute to as a leader but will be able to adhere to as an ecologically concious citizen. What do you enjoy more? The renewable energy side of things, the sustainability side of things or none of the above? Let me know in the comments!

Categories
Learning Renewable Energy

An Evening with the Technical Director of the Great Lakes Energy Institute

Last evening I attended a talk from Dr. Larry Viterna, director of the Great Lakes Energy Institute (GLEI), titled “Wind Energy Technology and Its Adoption by Industry and the Public”. It was hosted by the Cleveland IEEE, the Case Student chapter of IEEE and the EECS department of Case and it was spectacular.

Let me tell you, even though I was excited from the energy in the room at Sustainable Cleveland 2019 summit last week, this event really topped it. Perhaps it was just my perception. I was trying to explain why this was a big deal to me to my girlfriend later in the evening and this is what I came up with:

Even though the Sustainable Cleveland 2019 summit was full of people with energy and great ideas, this was different. This was a group of people all in the same room that spoke the technical language, that knew or were involved in the research behind some of the technologies being discussed…and were still super excited about sitting there. It gave me hope when I had been previously disappointed that there weren’t more engineers at the summit.

Not only that, it was one of those events where the content was things you’ve never heard before because the person telling them to you discovered them. As an example, Dr. Viterna told us of an empirical method he devised while at NASA back in the late 70s/early 80s that empirically defined when a wind turbine would stall out. Prior to that point, estimations had all been based on a 2D model of the turbine blades; past a certain amount of power you cannot accurately predict when a fixed-blade turbine will stall. He presented at a conference but nothing came of it (his words were that he was laughed off stage, though I hardly believe that). It was only years later that he discovered his method was being used regularly in the explanation of how and when wind turbines would stall out; that data can then be used to control the power output of the turbine, especially useful in high wind situation (so it doesn’t bust into a million pieces). Where else would I find that kind of personal content in a talk?

While I could go on from my notes about the detailed talk that Dr. Viterna gave, I will instead bullet point some of my favorite facts and notes:

  1. Denmark decided in the early 80s to move towards a completely renewable energy situation (even after oil prices dropped) because they were importing up to 60% of their oil at the time and were particularly hard hit by the oil crisis of the late 70s. (Sounds familiar, doesn’t it?)
  2. The US just passed all other countries in terms of wind energy capacity. We also have a growth rate per year in wind energy capacity of 45% compared to a global average 25%.
  3. A wind turbine is equally effective with two blades or three as long as the same amount of area is swept by the blades; convention is currently 3 blades as pioneered by companies in Denmark.
  4. Power generated by a turbine is proportional to the area covered by the blades and also proportional to the cube of the velocity of the wind. So big blades are good, but big gusts of wind are better.
  5. The limiting factor of wind turbines currently is the drive train assembly and the stresses that are placed on it. The fluid dynamics (of the wind) around a turbine system and the extreme stresses it places on the turbine are beginning to limit the overall power that can be converted by a turbine without catastrophic failure (see video above).
  6. The first mulit-megawatt turbine was first pioneered in the late 70s into the early 80s by NASA. No turbine had been able to match the power output up until a few years ago.
  7. While wind energy could never compete on a cost basis with dirty coal (even with subsidies), the relative costs are close to the costs of new, regulated, “clean coal” plants (which don’t yet exist).

I was very lucky to be in that room with 50 or so other engineers last night to hear Dr. Viterna speak. I also had the opportunity to personally pitch the idea to him about the Laboratories for Advanced Energy Commercialization (LAEC or “Lake”); he indicated that something would need to be in place, though he didn’t mention whether LAEC would specifically be viable. He also mentioned that GLEI is still quite young and that there is a lot of development that needs to be done on the research side of things to really get money flowing through the region and bring in more research companies.

Cleveland, Case and the whole community is lucky to have Dr. Viterna heading up the GLEI. I belive his leadership and his passion for energy will really help drive development in the energy arena and help boost Cleveland to the forefront of the advanced energy research scene. Please leave any thoughts you might have in the comments, including other facts about wind energy or local research I may have missed.

Categories
Learning Renewable Energy Sustainability

Third and Final Day of Sustainable Cleveland 2019

The last day.

It was pretty simple, really. Just collect your brainstormed ideas, distill them down into very few realistic ideas and then focus the best of those ideas into a final product. Once that is done, simply go up on stage and present in front of the 600 or so people that were attending. Simple… right? Right.

As you may remember from my explanation of Day 2 at the Sustainable Cleveland 2019 summit, I was in a group that focused on Advanced Energy Research. We were a group that had a much more diverse makeup than I had anticipated…I had expected only engineers in my quite limited sight. Instead we got a few engineers, a PR person, a patent lawyer, a stay-at-home mom, the head of financing at a non-profit, a start-up executive, a college student, a PR-person-turned-entrepreneur and a solar array installer. I couldn’t have made up that mix if I tried! But it was really great, the perspectives were unique and very much appreciated. Looking back at the roughly 6 hours of word we did, it’s amazing just how wide a breadth of ideas we covered and how we were able to reduce it to a final product.

So…what did we come up with?

Our group conceived an incubator of sorts, but with many more bells and whistles. Our focus was on the commercialization of technology, as that is probably the most difficult part in making a research concept into a tangible, sell-able product. As a starter name, we decided on “The Laboratories for Advanced Energy Commercialization” (LAEC…pronounced “LAKE”). Catchy, eh? I liked the name a lot. Anyway, the concept would be that eventually LAEC would become the center for all things advanced energy in Cleveland. The pinnacle of achievement would come when we constructed or rehabbed a building (LEED certified, of course) to serve as the center of advanced energy activity in Cleveland. This would include an “Energy Village”, where new technologies could be tested and showcased on model homes, in addition to subjecting it to the Cleveland elements. You think you have a great idea for a new solar panel? Well let’s see how it stands up to Cleveland’s cloudy days and great northern winters. Additionally, there would be a “PowerMart”, where now-commercialized technologies in their final form could be previewed and sold to municipalities and power companies from around the globe; this would help to showcase the region and bring outside investment to the area. Up to and past the point where a brick and mortar location for LAEC exists, the center would also act as a research resource and knowledge hub for all local and non-local researchers. Want to know which companies and Universities are researching or commercializing that new wind turbine technology? Check the LAEC databases or talk to a staff member we would hope to be able to hire. There would be maximum focus on being an independent, yet well connected and informed group that helps to bring all of the research and development firms in the area together around a common goal of increasing advanced energy knowledge.

There were many unanswered questions.

First off, funding. We really didn’t know where funding would come from for such a center. It’s possible that there are foundations out there that would be interested in sponsoring a center such as LAEC but never any guarantees. Other funding concerns would come later, if LAEC was ever truly established; how would the center be able to help to bring in funding for commercialization efforts that have always been so scarce in Cleveland in the first place? These are questions I am not sure the answer to.

If we take a further step back, another question remains: Doesn’t something like this already exist? Yes and no. There are many institutions that are serving the entrepreneurial crowd, some that serve the advanced energy crowd and some that serve the university crowd. However, we felt that there was not a central, all inclusive resource or institution that would allow for independent research and assistance in getting more money into the area for the commercialization of technology. Let’s be honest: Cleveland has many fine institutions that are capable of attracting funding and delivering worthwhile research. But while this does exist, the jobs are still not flooding the area as a result of any research breakthroughs. That is what LAEC would hope to deliver.

The summit left us on an interesting note. Our diverse team is now expected to go out and take action on a plan we set forth, including checkpoints at 3 weeks, 3 months and (1 to) 3 years. We are supposed to begin on our own but with some eventual guidance from the Mayor’s office at some point. As to when we will hear from them, I don’t know. What I do know is that I hear more about this summit and the resulting initiatives, I will continue to write about them here. If nothing ever comes of our ideas, I think there are other things that I could take away from the summit that will be equally, if not more, valuable than the plan for the LAEC.

So what did I really gain from the summit?

  1. Connections
    • The people I met at the summit was the first real glimpse I’ve had of the Cleveland working community outside of my company…and these were mostly non-engineering types. If nothing else, I learned that it is my duty to get out and begin networking better. Not for a better job or a higher salary, but because there are a lot of people out there with great ideas.
  2. Perspective
    • Similar to above, I never realized the passion of the people that are in the sustainability movement in Cleveland. There are multiple organizations that meet on a regular basis to discuss issues that are important to them and can truly affect the entire community. See some of the links below that I had just found out were locally run. Who knew there was so much interest in sustainability in a city that had a burning river 40 years ago?
    • More info
  3. Hope
    • It’s hard to explain the feelings most people have about Cleveland. It’s like the quirky second cousin you never tell your friends about. You still like your cousin, especially certain things about them…but you have very mixed feelings towards that cousin when others ask you about them. I have always toted the benefits of Cleveland to friends when I could, but I have felt it drag on me too…the negativity of others can be infectious, especially in the winter. But this summit gave me hope; it made me realize there are other people out there that see the potential and the great things that can be done in Cleveland. And that always feels good, no matter where you’re from. It was refreshing to be around that kind of excitement and I really hope that I get to be around something like it again soon.

So that’s all I have to say about the Sustainable Cleveland summit for now. I think there will be a continuing dialogue among my group, with the Mayor’s Office of Sustainability, with others from the conference and with outsiders that are not yet participating. If you have any kind of interest in participating in something like LAEC, please let me know, either by email, phone or in the comments. I think we can really make a difference for Cleveland and for progressing Advanced Energy technologies, but we need to work on it together.

(LEED certified, of course)
Categories
Analog Electronics Learning Life Renewable Energy

Day 2 of the Sustainable Cleveland 2019 summit

I must say, I’m impressed. My questions from day one have almost all been answered in one way or another. A few things really caught my attention today, some of which I didn’t really expect.

To start we had Ray Anderson of Interface. If you would have asked me what the company was just from the name I would have immediately jumped to technology. However, that’s not the case; Ray is in the business of carpets…and has been for 30 years or so. He also took a pledge, both for himself and for his company about 15 years back. A pledge to reduce environmental impact and do no harm. And they have succeeded so far (I didn’t get the feeling they were planning on quitting anytime soon). Here’s some of their broad stroke statistics on how they have progressed over the past 15 years:

  • 76% reduction in waste since 1996
  • 74% less water used to produce the carpet tiles
  • 44% less total energy used in production
  • 60% less fossil fuels in production
  • 27% use of renewable energy for production worldwide
  • 100% use of renewable energy for production in Europe
  • 24% recyclable or bio-based materials.
  • $405 million saved due to these reductions since 1994

Ray went on to explain the importance on reducing the overall impact of the technosphere on the biosphere (his words). He maintained that if we continue using technology in the wasteful, disposable ways we currently are, the future looks bleak. However, if we bring technology on as a reducer of waste instead of a primary contributor, great progress can be made towards a very low usage, need-driven (as opposed to want-driven) society. If I had to sum up the wonderful presentation by Ray Anderson, it would be this: do no harm in business and you will succeed. The results he has produced with his company Interface are a great example of renewable, sustainable practices producing a better shareholder solution and a better company for customers and the environment.

From there, we went on to explore the next stage of the AI process, the “Dream” stage. I believe this was an important component, trying to postively visualize where we believed the city could end up and finding a creative way of expressing it. There were many bold dreams of a Cleveland of tomorrow mixed in with a many themes that resonated throughout the presentations (more on those themes later). Some were sillier than others, which I have first-hand experience with: I was the captain of the Best Times 2019 boat.

Once the creative fervor was scaled back a bit, we smoothly transitioned into the design phase. This was by far the most exciting part and really what I had been waiting for. It is the meat of any AI gathering; when stuff really begins to come together and progress is finally made. We first were reminded about good brainstorming concepts. Personally, the concepts and ideas presented on how to brainstorm reminded me that this entire process was a great example of a crowd-sourced kind of activity. Key among the concepts was the notion having a multitude of ideas, so many that your head would spin. The concept is that among a large large group of ideas, a few winners would rise to the top, along with some accompanying themes. From there the groups would be able to identify the favorite ideas, group other thematic elements and begin to focus intensely on the top ideas. Hopefully, they can all be implemented into a single prototype that would later be presented as a final product, at least as a tangible result of the design/brainstorming process. Dr. Cooperrider used Ideo, the design firm and prior client of his, as an example of rapid prototyping and idea generation. I had heard about them previously but plan on finding out more about the world-renowned design firm.

Before going further, I think it’s important to list of the top-level themes that were identified from the “Dream” stage implemented earlier in the day:

  • Advanced Energy Research
  • Advanced Energy Generation
  • Advanced Materials and Manufacturing
  • Communication Campaign and Branding of the final ideas of the summit
  • Engaging 1.6 Million People
  • Fostering Social Capital
  • Green Buildings
  • Health
  • Vacant Land Use
  • Local Foods
  • Maintaining Post Summit Momentum
  • Metrics of Success (for the summit)
  • Public Compact (or Manifesto if you will)
  • Social Entrepreneurialship
  • Strategic Partnerships and Learning
  • Sustainable Business Innovation
  • Transportation
  • Waste to Profit
  • Water
  • World Class Sustainability Education

As new visitors to the site might guess (given the graphic at the top of my site) , I chose the very first topic. As an engineer really interested in renewable energy (and how it can be implemented), I felt it necessary to talk about the research aspect, as opposed to the generation, of the energy. I feel the latter can be left up to others for a time when the energy is cheap enough to be widespread; until it has reached the tipping point of being more economical to use renewables over other forms of energy, the research will never really be done. Past that, once commercial interests begin using renewables on a regular basis, investing in efficiencies will be a self-sustaining activity and one that only adds to the new benefit of renewable energy technologies. I plan on saving the results from today’s brainstorming session for a post tomorrow or the day after, simply because of the length of this post and in order to report on our finished idea, as opposed to an undeveloped seed of an idea.

While day 2 of Sustainable Cleveland 2019 was effective (OK, and a little bit fun, I’ll admit), I think tomorrow will really decide the final outcome of the entire summit. Without concrete action plans, the whole thing is for naught. The fears that the summit is actually just another run-of-the-mill convention will or will not come to fruition. If instead we take action on the plans we have in place tomorrow and the next day and the day after, then we will truly be able to say we have achieved something. I look forward to experiencing and writing about tomorrow.

Categories
Learning Life Renewable Energy

Day 1 of Sustainable Cleveland 2019

Today was the first day of the Sustainable Cleveland 2019 summit, hosted by Frank Jackson in downtown Cleveland. It was a mix of speakers, round-table discussions, breakout sessions and the usual other summit/convention type activities. We are continually reminded that this is not just some conference to be forgotten but instead acted upon later on. Time will tell if that comes to fruition and as I wrote before will require input from everyone in the community, including you Clevelanders out there reading this.

To start, here are some neat facts I learned today:

  1. Van Jones, from the department of sustainability for the white house, reminded us that only 80 Billion dollars of the American Reinvestment and Recovery Act were slated for “green” technologies. If you do the math 80/787 = 10.2% of the stimulus dollars are going towards renewable energy jobs and upgrades. Not enough.
  2. Peter Senge, author of “The Necessary Revolution” and professor at MIT, told us of a new(ish) EU initiative whereby cars made by European manufacturers must also be recycled by the same manufacturer. Imagine what kind of dramatic shifts in material usage and intelligent recycling will take place in order to preserve profitability and allow for (valuable) reuse of materials.
  3. Ray Anderson posed an interesting idea from an unknown book (as of right now) of designing systems and manufacturing environments using nature as a model. What would the byproducts of the process be reused as by other organisms? How can the process be optimized to use just enough energy, just as nature intends it? If there are materials pulled from the ground for use in the process, how are those same materials replenished at a later time?
  4. Jeff Baldassari, of The Taylor Companies (furniture), told us how his company has reduced waste throughout and optimized their process to a point that their entire monthly refuse hauling cost is only $1000.
  5. Dr. Senge also told us that we require an 80% reduction in carbon emissions to reduce global warming so it does not cross an irreversable threshold of run-away heating. More interesting, he told us about a project by MIT, an open source piece of software that allows the general public to better visualize what kinds of reductions we need in order to hit theose targets and how much collaborative action is required in the future. More info at http://climateinteractive.org/.

Aside from the speakers we also began the Appreciative Inquiry process, using techniques refined by our moderator David Cooperrider. We’re still in the “discovery” stage of the AI 4-D cycle (below), basically a time to figure out who is there, what individuals are good at and what in the past has worked well and can be built upon. The entire philosophy of the method is to focus on the positive aspects of change (what could be) instead of waiting until things go wrong and trying to fix them (what was). While it can produce some ideas for how to really enact the change, I am only expecting this summit to be a motivational type of event; an event that really makes people want to keep going with developing community and talking to their government leaders.

And although I have enjoyed my time so far, I’d like to point out some things I’m a bit skeptical about and questions that are yet unanswered:

  1. Will this really work? I believe my skepticism is based on the fact that we haven’t done anything yet. I’m told that happens on day 2 really, so I’ll have to find out more tomorrow.
  2. One of the things pointed out in some pre-summit literature is that to really drive change in a region, you need a critical mass of contributors in a given sector of a given region (i.e. wind turbine development in NE Ohio). Even if we do have some of the highest concentrations of engineers in the country (according to Van Jones), are they capable of working on renewable energy type systems? More importantly, are they driven to work on those types of applications? Finally, will there ever be enough business interest in those industries that would bring even more people into the region?
  3. Can we walk the walk? As a group of 700 succesful leader-types gathering at a conference/summit on sustainabilty, will we be able to go home each night and practice sustainability and not just talk about it? To be honest, I do what I can on the simpler side of things (CFLs, recycling, etc), but there needs to be more action and accountability by us first before we can ask others to do the same.
    • As a corollary, I wonder if it is ever possible to ask human beings–especially those that aren’t interested in the ideas we are working on–to consume less/sacrifice/etc. I know that we can be told to do something (reluctantly, I’m sure). I know we can be pressured into doing something because of super high taxes or prices. But the question is: can we drive people to realize that the typical American lifestyle is dangerous to the environment and can we make them care about it? I think this is a major hurdle and a topic I hope is brought up again and again at the summit. I’m skeptical that the general population will care about some of these issues; that is, until sea levels have risen past their doorsteps.

So far I have met some wonderful people, which if it came down to it, would be reason enough for me to attend this summit. Making connections with people that are enacting change in Cleveland really allows me to step outside the bubble of my world and to see what is important to others. In some cases technology doesn’t factor into their thought process at all, something that is hard for me to imagine. On the same note though, some of those I have met and am sure to meet more of are spectacular at working with people, something that is also not my strongest suit. I think there can be a mutual exchange of ideas among all of us that will allow me to grow as a person and as someone that will hopefully be able to drive change in my hometown.

What about you? Do you have any questions about the first day of the summit? Are you attending the summit and have somehow found this page? What is your take on the summit thus far? Let me know in the comments!

https://chrisgammell.com/2009/08/10/sustainable-cleveland-2019/
Categories
Analog Electronics Economics Politics Renewable Energy

Sustainable Cleveland 2019

I will be attending Sustainable Cleveland 2019 later this week. It has given me a renewed interest in renewable energy and has really been great motivation to learn more about my city.

The summit will be a gathering of more that 600 people from different walks of life in Cleveland, all trying to figure out what we need to do in order to become a leader in various fields of sustainability. The 2019 part of the title refers to the Cleveland 30 year from now, when all of the areas of sustainability will hopefully have been achieved. These sustainability initiatives could include:

  • Renewable energy production
  • Advanced energy (infrastructure)
  • Advance material fabrication and advanced manufacturing operations
  • Sustainable, local food sources
  • Green buildings (LEED certifications)
  • Stringent environmental policies, especially to protect our water source, Lake Erie
  • Sustainable Business Practices

So what can we do as a group of non-policy makers to actually drive any change in this city? A question I’m not completely sure of the answer. At the most basic level, I think this summit will give the citizens and drivers of change in the city a chance to tell the administration what they think. In fact, the entire summit is being hosted by the mayor, Frank Jackson, so I am guessing that’s exactly what he’s looking for. Beyond the basics, there is a methodology being implemented known as Appreciative Inquiry; I’m not into organizational behavior, but from what I’ve read it’s a popular method. The leading researcher in this field, David Cooperrider, will also be present at the summit to lead and guide us. I was surprised to later learn that Dr. Cooperrider is a sitting professor at my alma mater, Case Western Reserve University. From what I have learned about the method so far (which in all honesty seems a bit touchy-feely to me), it is about bringing people together while they are still excited about a prospective idea, instead of after problems have developed and that same group is only trying to fix the problem. It has proven successful for many groups thus far so I am eager to learn more about it.

Although this was the first time they decided to host such a summit, the organizers required an application for entry, to ensure people who were signing up were serious about their pledge to attend (the summit requires a 3 day commitment). I thought including some excerpts of my application would help illustrate why I think attending a summit like this is important (Warning: I was very interested in attending, so I felt it necessary to toot my own horn a bit. You’ve been warned) :

Describe what draws you to this summit.

I understand that a 10 year plan is only as good as the people that are writing and later following it. I want to be an integral part of the planning progress so I can help shape a future city that is sustainable and one that I can continue to be proud of. I am interested in meeting others that are passionate about moving Cleveland  towards a future that is sustainable, successful and forward-looking. The people at this summit will be the leaders of the next phase of Cleveland’s evolution and I would like to start working with them as soon as possible.

What unique aspects will you bring to the summit (education, life experience, etc.)?

I currently write a blog that discusses electrical engineering and renewable energy. I write on topics relating to my profession (analog electrical engineering), my generation (Gen Y) and I tie it into content about emerging renewable technologies. I also have a unique perspective, being a student that left the area for a job after college, thereby contributing to the “brain drain” that has affected much of Cleveland; I have since been one of the few that has returned (in 2008) so that I could help contribute to the city and pursue my passion at a company that is a leader in the measurement industry. My work at Keithley Instruments has given me insight into the needs of renewable energy producers and allowed me to work with some of the finest engineering minds in Cleveland.

I feel that I bring a fresh perspective on the technological aspect of building a sustainable Cleveland. As someone who works in an industry that serves renewable energy and as someone who aspires to work more directly in the renewable energy sector, I feel that I can help define where Cleveland will be able to best capitalize on new technologies and strong business opportunities. These will drive the future growth of Cleveland as both an economic hub and as a model for hosting sustainable and eco-conscious companies.

What do you think are Cleveland’s biggest strengths or best assets?

I believe that the students graduating from local Universities will be the foundation upon which the next phase of Cleveland will be built. Enticing them to stay in Cleveland and encouraging them to create new companies will generate revenue and jobs in Cleveland. The technology and companies that are created will drive local development and help bring in more residents and investment. Furthermore, I believe the Universities that are producing these students are an asset and that they should be assisted in post-graduate retention and building businesses out of commercialized research efforts.

A second more obvious but yet untapped resource is Lake Erie. In terms of energy, I believe Lake Erie can produce a great deal of clean and sustainable power for residents in Cleveland and surrounding areas. From a sustainability perspective, the availability of fresh water must be considered and protected, as this will become an increasingly scarce resource as the world warms. Additionally, the wildlife and food sources the lake provides must be taken into consideration when planning for a more sustainable city and region.

What do you envision for Cleveland in the year 2019?

I envision a vibrant job market based on renewable energy companies that have sprung up over the past 10 years. More importantly, I see educational and research hotbeds such as Case Western Reserve being used as a launch point for multiple new industries and technologies. I see renewable energies being harvested from Lake Erie in the form of wind turbines and wave harvesting. I see axillary industries such as test & measurements adding even more to local economies and highlighting what Cleveland has to offer the world. I see tight-knit communities encouraging conservation and recycling and teaching these concepts in schools. I see programs in place to help every city have affordable recycling. I imagine local and regional governments encouraging restructuring and consolidating existing infrastructure as opposed to creating new sprawl. I see those same governments encouraging outside investment in the newly reconstructed and consolidated areas and in the new companies that have helped revitalize it . And hopefully, I see my own renewable energy company creating products that change the way we consume energy or how we cleanly produce it for use in energy efficient devices.

I feel that if nothing else, I will get the opportunity to meet others interested in sustainability and renewable energy in Cleveland. That alone could provide a great foundation for forming companies and coalitions later to help advance the city towards a sustainable future. On the other hand, I am hopeful that our work using Appreciative Inquiry will help lay a groundwork for where the city needs to go and what we need to do as a community to achieve our goals. I know there will be many planned follow up activities and I plan on discussing them more on here later. I would hope that my albeit limited audience might help to publicize the actions the city will take in the future.

Are you attending the Sustainable Cleveland 2019 summit? If you are, please let me know! If not but you have ideas that you think I should try to talk about while I am there, please let me know in the comments. I am interested to share what ideas I already have and if I can bring more voices than my own to the summit, I think it could be beneficial for everyone.

http://en.wikipedia.org/wiki/Lake_Erie
Categories
Engineering Life Music Renewable Energy

Engineering the Perfect Day

I don’t get too personal on my blog.

  1. My blog is about my professional life (mostly)
  2. It’s just the way I am

But on the way home last night I was thinking about how I might define a perfect day and thought it could be a good insight into who I am. You might not care but Chris-ten-years-from-now might, so I’ll write it for him. I think the exercise is healthy as long as it’s not taken too far (ie. I don’t plan on arranging my whole life around constructing this day exactly); but in general believe that this image should be used as a guide towards what I would like to be doing with my life and what I would like to accomplish.

  • 7:00 – 7:04 am
    • Wake up to kisses from my girlfriend and two puppies. Lie in bed thinking about what I can accomplish that day. Smell the pot of coffee brewing on a timer downstairs.
  • 7:04 – 7:47 am
    • Watch the Daily Show from the previous evening while drinking a cup of dark roasted, aforementioned coffee and noshing on a scone or waffle. Check on the status of my house and see how the renewable energy storage system is holding up after a night of not being able to collect energy.
  • 7:50 – 8:00 am
    • Walk to my own business/workshop/office just down the street. The weather in my dream-world would of course be beautiful all year round and would never have rain or snow (except on days I’m free to go sledding). Be greeted by my employees/co-workers/friends at the office.
  • 8:00 – 11:32 am
    • Work the whole morning on a new device that will allow people to better harvest energy from the environment in a friendly way (energy scavenging perhaps?). I don’t have more details about this part of my perfect day because the device hasn’t been invented yet.
  • 11:32 am – 12:13 pm
    • Lunch with everyone around the office. Bounce ideas off of people on how to better improve the energy device and how to get it to places people need it the most.
  • 12:13 – 2:34 pm
    • More work. At 1:24 pm I get that awesome feeling you get when you realize you just discovered something no one else has ever discovered (I have had that feeling many more times than it has ever been true…in this case it would be). The product still needs some development, but it’s at that moment that I know it is a viable solution and something that can be made and sold to people who need it.
  • 2:45 – 3:45 pm
    • Celebratory massage (Sometimes you just gotta chill out).
  • 4:00 pm – 5:47 pm
    • Soundcheck and a light rehearsal with my band. It goes flawlessly and everyone is very excited about the show. We decide at the last minute to include a cover of a song that we think will be a crowd pleaser (for all ages).
  • 6:02 – 7:47 pm
    • Dinner with family and a small group of friends at the local bistro. We have some kind of a duck dish paired with a few Great Lakes brews. It is absolutely delicious. The entire meal is complimented by intellectually stimulating conversation and friends getting to meet family.
  • 8:01 – 8:53 pm
    • Relax with bandmates backstage. Visit from tech/nerd/music fan who wanted to meet us and we all hang out.
  • 9:00 – 10:45 pm
    • A night of jazz and funk in front of friends, family and fans. The fans are people that are genuinely interested in the type of music I play. The friends are from all over the country and have come back for this show. The pianos and organs and pedals and amps have all been inspected, repaired and sometimes created by me. I also get to debut a new effect that has never been used before in music production. In lab tests the new effect makes people want to get up and dance 46% more than music played without it. I had previously decided to call it a danceofonium.
  • 10:47 – 12:30 am
    • Hanging out backstage with all of my friends that were nice enough to come to my show. Friends from different parts of my life get to meet and get along really well. Everyone there enjoys good music, food and beer, all of which are being served up liberally.
  • 12:56 am
    • The day ends as wonderfully as it starts: a kiss goodnight from my girlfriend and puppies. I drift off to sleep dreaming of tomorrow.

I know someone out the might ask “But if you feel like music is such an important part of your life, why do you do engineering?” A valid question. First off, I think engineering is an even more important part of my life. I don’t think our chosen work should be taken lightly, as it’s 1/3 of our lives roughly, and because of that I sought out work that continually challenges me and allows me to try different things every day. I think that engineering allows the part of me that wants to impact the world and leave a legacy behind that has much further implications than music. Engineering (and specifically electrical engineering) is collaborative, creative and can have a very positive impact on millions of people. While I feel that music can do the same, I don’t feel like that’s the reason I play music and I’m not sure I would want to play music to try to change the world. In the end, I play music for myself and for my friends and if other people enjoy it, that is an added bonus.

I’m curious, what is your perfect day like? Have you ever thought of something like this before? I think it really can give you and those around you great insight into what you aspire to be and do with your life. I would love to see what you have in mind in the comments on this page or a link to a post you write about your perfect day.